top of page

VIPER Security System 5706V

Japanese instruction manual included

-Selectable siren: You can choose the tone by cutting the wiring inside the siren.

- Siren time selection (default setting is 30 seconds, can be changed to 60 seconds) You can select the time for the full siren to sound. - Silent mode You can operate the security without sounding the siren's operating sound (click tone).

- Light flash answerback: Position and hazard lights will flash to confirm security operation (varies depending on connection method)

- Panic mode: Force the siren to sound to scare off intruders

- Security and door lock interlocking: Genuine doors can be locked and unlocked in conjunction with the security ON/OFF setting.

- Equipped with an operation confirmation LED (blue). The LED flashes when the security function is activated (it lights up in barrage mode).

- Diagnostic function After the security alarm goes off, you can check which sensor reacted by checking the number of times the LED flashes.

- NPC function (nuisance prevention function) If the same sensor reacts three times within an hour, the sensor will be temporarily canceled.

- Kill relay function: The engine cannot be started while the security is activated (depends on the connection method and vehicle model)

- Forced release function: If the remote control is broken, you can release the security without the remote control.

- Passive function: Security can be activated automatically after the door is closed (settings required)

Valet mode: Disables security functions and enables keyless entry.

・Can be used as an engine starter only

- AUX (-) signal output function (there are 4 outputs) Function to operate trunk opening, sliding door opening, etc. with VIPER remote control (Because the output is weak, be sure to use a relay. Also, wiring differs depending on the car model)

- Remote engine starter (default setting is 12 minutes, can be changed to 24 minutes or 60 minutes) The engine can be started with a remote control.

- Turbo timer (The default setting is off. You can select 1 minute, 3 minutes, 5 minutes, or 10 minutes.) By operating the remote control when you get out of the car, you can enable after-idling.

- Convenience store mode (Valet Takeover) You can turn on security by removing the key with the engine running.

- One full-color answerback remote control is included (rechargeable via the included USB cable). The remote control will be notified when the siren sounds, when the full siren is on, or when the engine starter is in use.

-One 1-way remote control included (button battery type sold at convenience stores, etc.) Spare remote control without answerback function

[Normal delivery time]

1-3 days

*If you are in a hurry, please contact us before purchasing.

*Security installation can also be performed by an electrical equipment technician.

VIPER CLIFFORD Authorized Dealer

VIPER Security 5706V

¥60,500Price
Sales Tax Included
    bottom of page